|
Post by Steve Austin on Feb 12, 2007 12:08:36 GMT -8
OK Guys, It's been a long time coming and I've finally got the foam glued together for the 1/5th scale model of the C5 Corvette. I'm building the web pages for the foam process and they should be live in a couple of weeks on my website, so for those of you who are interested keep checking back for the latest development. The website still holds plenty of information for newcomers, while those of you who are familiar be patient because the info is coming. If there is any procedure that is pressing please post your question for a quick response. Steve
|
|
geep
New Member
Posts: 26
|
Post by geep on Feb 15, 2007 14:05:59 GMT -8
I'm looking forward to it.
|
|
geep
New Member
Posts: 26
|
Post by geep on Feb 26, 2007 0:18:17 GMT -8
Looking good!
Much cleaner than my foam work too. Mine looked hideous until I covered it with clay.
I like how you cut the foam to the full-size drawing. I limited my ability to do that with the design of my armature. The stiffeners in the middle made it difficult to piece the foam together around it while holding to a drawing.
In future, I'll make my armature easier to work with!
|
|